NEC UNIVERGE SV8300 Command Manual page 333

COMMAND CODE TITLE:
31
Y
DATA
A 37 Tone Duration (Off time) of MFC (Forward
Signal/Backward Signal)
[8300R3.5]
NOTE:
38 Forward signal receiver S/N ratio
[8300R3.5]
NOTE:
39 Forward signal receiver ON detect time
[8300R3.5]
NOTE:
40 Forward signal receiver OFF detect time
[8300R3.5]
NOTE:
41 Backward signal receiver Start delay time
[8300R3.5]
NOTE:
MFC/MF-ANI TRUNK DATA
1ST DATA
MEANING
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
DATA
00 1 dB
09 10 dB
NONE 10 dB
00 0 dB
01 -5 dB
02 -10 dB
03 -15 dB
04 -20 dB
NONE -10 dB
01 30 ms.
98 1485 ms.
99 3840 ms.
NONE 30 ms.
01 30 ms.
98 1485 ms.
99 3840 ms.
NONE 30 ms.
00 0 ms.
98 24.5 ms.
99 64 ms.
NONE 0 ms.
3-277
: Default
2ND DATA
MEANING
Increment unit: 1 dB
Increment unit: 15 ms.
Increment unit: 15 ms.
Increment unit: 0.25 ms.
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CM31
91ch3003.fm