NEC UNIVERGE SV8300 Command Manual page 336

COMMAND CODE TITLE:
31
Y
DATA
A 47 Backward signal receiver ON detect time
[8300R3.5]
NOTE:
48 Backward signal receiver OFF detect time
[8300R3.5]
NOTE:
49 Number of received digits of called number
from PSTN
[8300R3.5]
NOTE:
50 Number of received digits of ANI signal
from PSTN
[8300R3.5]
51 Forward signal meaning no ANI signal on
DOD/DID MFC call
[8300R3.5]
90 MFC Signaling Data Soft Reset
[8300R3.5]
NOTE:
MFC/MF-ANI TRUNK DATA
1ST DATA
MEANING
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
A reset by CM31 Y=A>90: 0 is required after this data setting.
Reset MFC Signaling Data after confirming all the MFC-trunk are not used.
DATA
01 30 ms.
98 1485 ms.
99 3840 ms.
NONE 30 ms.
01 30 ms.
98 1485 ms.
99 3840 ms.
NONE 30 ms.
01 1 digit
31 31 digits
NONE 31 digits
01 1 digit
31 31 digits
NONE 16 digits
01 Forward GI-1
15 Forward GI-15
NONE No data
0 To reset
1 Already reset
3-280
: Default
2ND DATA
MEANING
Increment unit: 15 ms.
Increment unit: 15 ms.
Increment unit: 1 digit
Increment unit: 1 digit
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CM31
91ch3003.fm