NEC UNIVERGE SV8300 Command Manual page 327

COMMAND CODE TITLE:
31
Y
DATA
1 2 Number of received digits of called
number from PSTN/T1 network
3 00 Signal pattern received from T1 network
[North America Only]
NOTE:
6 01 Received Backward GA signals on DOD
MFC call
15 01-15: Backward Group A1-A15
[8300R3.5]
7 01 Received Backward GB signals on DOD
MFC call
15 01-15: Backward Group B1-B15
[8300R3.5]
MFC/MF-ANI TRUNK DATA
1ST DATA
MEANING
RESET
RESET
When the signal pattern from T1 network is FGD format, assign the data to "NONE". When
the signal pattern from T1 network is ANI format, assign the data "02".
DATA
01 1 digit
31 31 digits
NONE No data
01 Called number + ANI
02 ANI
03 Called number
NONE ANI + Called number
00 Send first digit
01 Send next digit (N+1)
02 Send last but one digit (n-1)
03 Address complete, change over GB
04 Congestion
05 Send calling party's category No.
06 Address complete, setup speech condition
07 Send last but two digit (n-2)
08 Send last but three digit (n-3)
09 Send last digit
NONE No data
01 Subscriber's Line Free (Charge)
02 Subscriber's Line Busy
04 Congestion
05 Subscriber's Line Free (No Charge)
06 Subscriber's Line Free (Call under control)
07 Unallocated Number/Collect Call Blocking
08 Subscriber's Make busy
NONE No data
3-271
: Default
2ND DATA
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CM31
91ch3003.fm