NEC UNIVERGE SV8300 Command Manual page 88

COMMAND CODE TITLE:
05
Y
No. MEANING
0 Blade Type
BLADE RESET
1 Trunk Blade number
BLADE RESET
2 Number of Highway
channel for ISDN Data
Communication
[8300R3]
RESET
NOTE 1: Setting the Number of Highway channel to 16 is recommended when Highway channel of Line/Trunk
chassis remains.
NOTE 2:
When the second data is NONE (no data), BRT/PRT blade for ISDN data communication must be ac-
commodated to the base slot (Slot No. 01/07/13) of each Line/Trunk chassis. In this case, the available
Highway channels for data communication are the only first 16 channels. Be sure to set this data when
performing data communication with PRT blade.
BLADE TYPE, TRUNK BLADE NUMBER, HIGHWAY CHANNEL FOR
ISDN DATA COMMUNICATION
1ST DATA
DATA MEANING
XX ZZ XX : Unit No. (01-50)
ZZ : Slot No. (01-18)
See "About Unit
number, Slot number
and Circuit number"
XX : Unit No. (01-50)
ZZ : Line/Trunk chas-
sis No. (01-03)
See"About Unit
number, Slot number
and Circuit number"
2ND DATA
DATA
50 ZT Interface Blade
(CD-4CSIB/
CD-4CSIB-A)
60 ISDN Line Circuit
Blade
(CD-2BRIA)
70 In-Skin UMS Blade
(CD-VM00)
71 Conference Blade
(CD-PVAA)
[8300R2]
NONE No data
000 Trunk Blade number 000
127 Trunk Blade number 127
NONE No data
01 Number of Highway
channel for ISDN Data
16 Communication
NONE No data
3-32
: Default
RELATED
COMMAND
MEANING
CMAA
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM05