NEC UNIVERGE SV8300 Command Manual page 473

COMMAND CODE TITLE:
51
No.
08 Same as CM51 Y=06 (for station call)
09 Transfer destination of incoming call when a
called station is set to Call Forwarding-All
Calls/Busy Line/No Answer and the destina-
tion of forwarded call is set to the Attendant
Console Night Mode is set (for DID/DIT/Tie
Line call)
Transfer destination of incoming call when Do
Not Disturb is set to the Attendant Console
Night Mode is set assigned by CM51 Y=10
(for DID/Tie Line call)
10 Transfer destination of incoming call when Do
Not Disturb is set to the called station (for
DID/DIT/Tie line/station call)
NOTE: This data is available when CM08>240 is set to 1.
AUTOMATIC TRANSFER DESTINATIONS
Y
MEANING
GROUP NUMBER
DATA MEANING
00 Tenant 00
63 Tenant 63
00 Tenant 00
63 Tenant 63
3-417
SETTING DATA
DATA MEANING
E000 Attendant Console
[8300R2]
EBXXX Voice Response
system No.
XXX: 000-007
[8300R6
software
or before]
: 000-015
[8300R7
software
or later]
NONE No data
X
Station No.
XXXXXXXX
E000 Attendant Console
[8300R2]
NONE No data
X Station No.
XXXXXXXX
E000 Attendant Console
[8300R2]
NONE No data
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM51
: Default
91ch3005.fm