NEC UNIVERGE SV8300 Command Manual page 672

COMMAND CODE TITLE:
BA
Y
No. MEANING
44 Caller ID conversion on
SIP trunk call
NOTE 1: CMBA Y=44 must be set when using Caller ID conversion on SIP trunk call.
NOTE 2: For details of Caller ID conversion mode, see NOTE 3 of CM8A Y=5XXX>176.
45 Setting of SIP AoR
user name with charac-
ter
NOTE 1:
You can also confirm the SIP AoR user name set by CMBA Y=46/47/54 with this command.
NOTE 2: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to "0").
46 Setting of SIP AoR
user name with charac-
ter code (First 12 char-
acters)
NOTE 1: You can confirm the user name set by this command with CMBA Y=45.
NOTE 2:
Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to "0").
SIP PROFILE DATA
1ST DATA
DATA MEANING
00 Profile number
for control packet
31
RESET
Page 3-527
00 Profile number
for control packet
31
RESET
00 Profile number
for control packet
31
RESET
2ND DATA
DATA
00 Caller ID conversion
mode 0
01 Caller ID conversion
mode 1
02 Caller ID conversion
mode 2
03 Caller ID conversion
mode 3
15 Not provided
XXX...X SIP AoR user name
(Maximum 32 charac-
ters)
NONE No data
XXX...X SIP AoR user name
(24 digits, 12 charac-
ters fixed)
NONE No data
3-616
: Default
RELATED
COMMAND
MEANING
CM8A
Y=5XXX>
176
CMA7 Y=71
CMA7 Y=71
CMBA Y=46,
47, 54
CMA7 Y=71
CMBA Y=45,
47, 54
See Character
Code Table in
CM77.
Continued on next page
NWA-033623-001 Rev.8.1
CMBA
91ch3007.fm
JUNE/15/2011