NEC UNIVERGE SV8300 Command Manual page 547

COMMAND CODE TITLE:
76
Y
No. MEANING
38 Interval of SLT/
Multiline Termi-
nal ringing tone
for DID incoming
call with no CLI
NOTE 1: Assign this command when the terminal destination is SLT or Multiline Terminal.
NOTE 2:
This command is effective when CM76 Y=34, 36 is set to 0 or 2.
NOTE 3: For SLT, Internal Ringing is applied. For Multiline Terminal, Special Ringing; 0.5 seconds ON-0.5
seconds OFF
0.25 seconds ON-0.25 seconds OFF-0.25 seconds ON-0.25 seconds OFF
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number
Conversion
Block No.
assigned by
CM76 Y=00/90
[For Australia/Asia/Africa/Europe/Latin America/Middle East/Russia]
2ND DATA
MEANING
0 Ringing NOTE3
1 Special Ringing
2 Internal Ringing
3 As per CM35 Y=033
[Other than North America]
0 0.5 seconds ON-0.5 seconds OFF
(Multiline Terminal)
1 second ON-2 seconds OFF (SLT)
1 0.5 seconds ON-0.5 seconds OFF
-0.5 seconds ON-1.5 seconds OFF
(Multiline Terminal)
0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
(SLT)
2 1 second ON-2 second OFF
(Multiline Terminal or SLT)
3 As per CM35 Y=033
[North America Only]
3-491
: Default
REMARKS
CM08>397
See CM08>397 CM35 Y=033
CM76 Y=34,
See CM08>397 36
See CM08>397
[For EU] is applied.
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/31/2012
CM76
or