NEC UNIVERGE SV8300 Command Manual page 635

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

COMMAND CODE TITLE:

Programming procedure of CMA8 Y=1 is as follows.

- For IPT (P2P CCIS), set this data IP address of destination IPT (VoIP address of destina-

tion office).

- For Point-to-Point connection to SIP trunk (CMA7 Y=46: 1), this data is not needed to as-

- For Point-to-Multipoint connection to SIP trunk (CMA7 Y=46: 0), set this data to IP ad-

dress of destination IPT (VoIP address of destination office).

CCIS CHANNEL/IP TRUNK/SIP TRUNK DATA 2

NWA-033623-001 Rev.8.1

APRIL/16/2010