NEC UNIVERGE SV8300 Command Manual page 231

COMMAND CODE TITLE:
12
Y
No. MEANING
72 DT300/700 series Display
Enhancement for Univer-
sal Design
[8300R3]
NOTE: This data is effective only when DT330/DT710 (DESI-less only)/DT730/DT750 are used.
76 DT700 Menu time out
timer setting
[8300R3]
NOTE: Set this data to "00" and reset the station when using DTPlusWare.
77 Dual Ringing
[8300R5]
NOTE 1: Set this data for Mobility Access station from CAT/PCPro.
NOTE 2: "DATA ERROR" is displayed on LCD when System version license is not registered, if this data is set
to "0".
78 Registration of master sta-
tion/sub station in suite
room
[8300R5]
79 Suite Room Group Number
[8300R5]
NOTE:
This data must be set for both master station and sub stations in suite room.
80 Trunk Access Code for Call
Forwarding in Mobility
Access Mode
[8300R6]
STATION CLASS-1
DATA
0 Second line is twofold font, First line is delete
1 Third line is twofold font, First line is delete
NONE Twofold font is not display
00 No time out
01 1 minute
16 16 minutes
NONE 4 minutes
0 Available
1 Not available
0 Master station
1 Sub station
3 Ordinary station
000 Suite Room Group number 000
127 Suite Room Group number 127
NONE No data
1 Trunk Access Code 1
2 Trunk Access Code 2
3 Trunk Access Code 3
4 Trunk Access Code 4
NONE Trunk Access Code 1
SETTING DATA
MEANING
3-175
CM12
: Default
RELATED
COMMAND
CM90 Y=00:
F5030, F5031
CM12 Y=79
CM57 Y=34
CM12 Y=78
CM57 Y=34
CM20 Y=0-3:
A256, A267-
A269
CM64 Y=10,
14-16
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
JUNE/15/2011