NEC UNIVERGE SV8300 Command Manual page 322

COMMAND CODE TITLE:
30
Y
No. MEANING
33 Automated Attendant
Handling of all PBR busy when
2nd announcement and DT are
connected.
See CM30 Y=30/31: 08
34 ISDN Local Office Code Table
number
35 CIC (Circuit Identification Code)
used for No. 7 CCIS/SIP voice
channels
NOTE 1:
For Point-to-Multipoint connection (when CMA7 Y=46 is set to "0"), be sure that the trunk route No.
assigned by this data does not overlap the trunk route No. used for IPT (P2P CCIS) within a same
office.
NOTE 2: Set this data after setting CM35 Y=090/091.
37 Handling of timed-out Automated
Attendant call in Night Mode
TRUNK DATA
DATA
00
01
03
15
00
14
15
001
127
NONE
RESET
00
15
SETTING DATA
MEANING
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
[8300R2]
C.O. line release
Local Office Code Table No. 00
Local Office Code Table No. 14
Not assigned
CIC 001
CIC 127
No data
Same as CM30 Y=32
3-266
CM30
: Default
RELATED
COMMAND
CM30 Y=30, 31
CM50 Y=05
CM35 Y=090, 091
Same as CM30
Y=32
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JUNE/15/2011