NEC UNIVERGE SV8300 Command Manual page 263

COMMAND CODE TITLE:
15
Service Restriction Class C
No.
484 Priority for Call Forwarding-All Calls of Mobility Access call
PRIORITY
Restriction of Inter-tenant Connection
HIGH
Call Forwarding-All Calls/Split Call For-
warding-All Calls
Call Forwarding-All Calls of Mobility
Access
Alternative ISDN Connection when Remote
Unit in survival mode (CID Call Routing per
each station)
Alternative ISDN Connection when Remote
Unit in survival mode (CID Call Routing per
each tenant)
Call Forwarding-Logout (IP Station)
Do Not Disturb/Return Message Schedule
UCD (Uniform Call Distribution)
Station Hunting
Call Forwarding-Busy Line/Split Call For-
LOW
warding-Busy Line
NOTE: Set the 2nd data to "0" to Mobility Access station number for Call Forwarding-All Calls of Mobility Ac-
cess call.
SERVICE RESTRICTION CLASS C
Y
MEANING
2ND DATA=0
SERVICE
REST.
CLASS (C)
00
15
Restriction of Inter-tenant Connection
Call Forwarding-All Calls of Mobility
Access
Alternative ISDN Connection when Remote
Unit in survival mode (CID Call Routing per
each station)
Alternative ISDN Connection when Remote
Unit in survival mode (CID Call Routing per
each tenant)
Call Forwarding-Logout (IP Station)
Call Forwarding-All Calls/Split Call For-
warding-All Calls
Do Not Disturb/Return Message Schedule
UCD (Uniform Call Distribution)
Station Hunting
Call Forwarding-Busy Line/Split Call For-
warding-Busy Line
3-207
: Default
SETTING DATA
DATA MEANING
0 See below
3
: Default
2ND DATA=3
Continued on next page
NWA-033623-001 Rev.8.1
JUNE/15/2011
CM15
91ch3002.fm