NEC UNIVERGE SV8300 Command Manual page 512

COMMAND CODE TITLE:
67
Y
No. MEANING
01 Type of Service
(TOS) field Prece-
dence for IP Sta-
tion/IPT (P2P
CCIS)/VoIPDB
between locations
NOTE 1: This data setting is valid to the packets that are sent to the location which is set to "ZZ" in the first
data from the location which is set to "XX" in the first data.
NOTE 2:
The priority of PRECEDENCE 0-7 is as follows.
PRECEDENCE 0: Lowest priority
PRECEDENCE 7: Highest priority
PRECEDENCE 6 for control packet and PRECEDENCE 5 for voice packet are recommended.
NOTE 3: By CM67 Y=01 setting, the router recognizes the precedence of control packet and voice packet and
controls Weighted Fair Queuing (WFQ).
NOTE 4: When this data is set, DSCP set by CM67 Y=06 becomes invalid.
LOCATION DATA ASSIGNMENT
1ST DATA
DATA MEANING
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
2ND DATA
DATA MEANING
X Z X: PRECEDENCE 0-7
for control packet
Z : PRECEDENCE 0-7
for voice packet
NONE 65
CCC Clear
3-456
CM67
: Default
RELATED
COMMAND
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CMAD Y=29
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
NOVEMBER/12/2008