NEC UNIVERGE SV8300 Command Manual page 130

COMMAND CODE TITLE:
08
817 OAI SMFN STS (status) when the forwarded call with Call
Forwarding-All Calls/Busy Line/No Answer is terminated to a
station via CCIS (SMFN FID=1)
OAI SMFN STS (status) when a station answers via CCIS the
forwarded call with Call Forwarding-All Calls/Busy Line/No
Answer (SMFN FID=2)
818 Send OAI SMFN when Exclusive Hold
[For EU]
820 Display of the monetary unit for ISDN call charge
NOTE: When the second data is set to 1 and CM04 Y=00>00 is set to 01-31, $ is displayed.
Set this command for the area where the monetary unit is not displayed (where the dollar unit is not
used).
823 SMDR service for incoming calls of each station assigned by
CM13 Y=05
NOTE: To provide SMDR for abandoned incoming calls, as-
sign second data of CM08>823 to 0 (Ineffective).
824 DID Development Table for guest station
NOTE:
Set the second data the same as the DID Development Table number assigned by CM35 Y=170.
825 Number of digits for a sequence used to communicate with the
PMS
826 Timing that the system sends a recovery process request to the
PMS on IP
827 Parity check for Built-in SMDR on IP
828 Kind of parity for Built-in SMDR on IP
BASIC SERVICES
BASIC SERVICE
0 SMFN STS=4/5/6
1 SMFN STS=0
0 SMFN STS=5/6/7
1 SMFN STS=0
0 To send
1 Not sent
0 Monetary unit is not displayed
1 As per CM04 Y=00>00
0 Ineffective
1 Effective
0 Development Table 1 for DID number
assigned by CM76 Y=90
1 Development Table 0 for DID number
assigned by CM76 Y=00
0 3 digits (000-199)
1 2 digits (00-99)
0 At every connection establishment
1 At the first connection establishment
only since system reset
0 None parity
1 Parity as for CM08>828
0 Odd parity
1 Even parity
3-74
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JUNE/15/2011
CM08