NEC UNIVERGE SV8300 Command Manual page 316

COMMAND CODE TITLE:
30
Y
No. MEANING
02 Terminating system in Day Mode
for incoming C.O. calls
NOTE 1: When data 02, 03, 11 or 12 is assigned, set CM30 Y=18 to 0.
NOTE 2:
For DIDs and Tie Lines, set CM30 Y=02 and CM30 Y=03 to 31.
NOTE 3: When data 18 is assigned, the maximum dialed number can be received in ISDN Indial differ with
command as bellow.
- When using CM76 Y=00, the maximum dialed number is 4 digits.
- When using CM76 Y=90, the maximum dialed number is 8 digits.
TRUNK DATA
DATA
02
03
04
06
08
09
10
11
12
13
14
16
18
21
23
31
SETTING DATA
MEANING
Trunk Line (Direct) Appearance
Trunk Line (Direct) Appearance + TAS
Direct-In Termination
Direct-In Termination + Trunk Line
(Direct) Appearance
Dial-in
Automated Attendant
Attendant Console + TAS
[8300R2]
Attendant Console + Trunk Line
(Direct) Appearance
[8300R2]
Attendant Console + Trunk Line
(Direct) Appearance + TAS
[8300R2]
TAS
Attendant Console
[8300R2]
Remote Access to System (DISA)
ISDN Indial
(for receiving maximum 8digits dialed
number)
ISDN Indial
(for receiving complete dialed number)
Enblock Dialing Method
(for Forced On PBX)
[8300R7] [For EU]
DID, Tie Line and the call which is not
handled by the PBX
3-260
CM30
: Default
RELATED
COMMAND
CM30 Y=18
CM30 Y=04
CM49, CM64
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/31/2012