NEC UNIVERGE SV8300 Command Manual page 119

COMMAND CODE TITLE:
08
BASIC SERVICE: 502-599
502 Name display on the called station when calling from Sub Line
Calling Party Name sending to ISDN when making an outgoing
call from Sub Line
NOTE: In other than North America, this command is effective when using 8300R4 software or later.
503 Send RBT when the called PS is out of cell (zone) or the power
is off/the called Standard SIP station is in off hook state, the
power is off, or the cable is pulled out
NOTE: Effective only for station-to-station call or originating office on WCS roaming.
504 PS/Standard SIP station No-Answer
507 Send calling station number to the analog telephone for Caller
ID-Station when an internal call is terminated.
NOTE: This command is effective only when CM08>603 is set to "0".
508 Mask indication (*) for Station Authorization Code entry
509 Call Forwarding-Override when the Call Forwarding-All Calls
is set to the My Line of Multiline Terminal
510 Station Hunting-Not Available when the called PS is out of cell
(zone) or the power is off/Station Hunting-Standard SIP station
Off Hook/Power Off/Cable Pulled Out
513 ID registration method for IP Station
514 Whether the system encodes the station number when IP Sta-
tions login to the network
515 Whether the system encodes the password when IP Stations
login to the network
BASIC SERVICES
BASIC SERVICE
0 Name display of My Line
1 Name display of Sub Line
0 Name of My Line
1 Name of Sub Line
0 Not sent
1 To send
0 Available
1 Not available
0 Not sent
1 To send
0 To provide
1 Not provided
0 Call Forwarding-Override
1 As per CM08>268
0 Available
1 Not available
0 Protected Login Mode for All IP Sta-
tions
1 As per CM15 Y=480
0 To encode (NEC Original method)
1 Not encoded
0 Not encoded
1 To encode (As per CM08>517)
3-63
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08