NEC UNIVERGE SV8300 Command Manual page 47

CONDITION
Commands which require a
reset of the CPU blade after
data setting.
• Press RESET switch on
the CPU blade for system
NOTE 1
reset.
RESET
NOTE 1:
Before the CPU blade is reset, the system data backup must be executed by CMEC Y=6>0: 0.
NOTE 2:
A system reset is required only for CCT/SIP trunk.
Conditions for Using Commands
COMMANDS
CM05 Y=2
CM08>335, 391, 420, 592,
909
CM0B Y=0XX,
Y=1XX>00-02, 09, 20,
30-40, 43, 50-52, 60, 61,
66, 70, 80-84, 143,
Y=2XX>00, 20-26, 40, 91,
Y=000
CM10 Y=00: DXXX,
Y=03 NOTE 2
CM30 Y=00, 35
CM31 Y=0, 1, 3, B
CM41 Y=0>123, 151-153 System Timer Data
CM42>66
CMA7 Y=01, 46
CMAD Y=50
CMBA Y=04, 10, 21, 22,
25, 27, 29-32, 44-47, 52,
54-56, 70-79, 82-88,
91-110, 112, 113, 117, 118,
120-123, 126, 131, 139
CMBC Y=03, 06, 07, 15
2-3
Chapter 2 PRECAUTION
CONDITIONS FOR USING COMMANDS
MEANINGS
Blade Type, Trunk Blade Number, Highway
Channel for ISDN Data Communication
Basic Services
LAN Data Assignment
Station Number, Trunk Number, Blade Num-
ber
Trunk Data
MFC/MF-ANI Trunk Data
System Counter Data/Pad Data/Trunk
Restriction Class Conversion/Codec List
CCIS Channel/IP Trunk/SIP Trunk Data 1
ZT/SIP Converter Calling Area/PAD Data
Assignment
SIP Profile Data
Presence service, SIP Converter, Greeting
Process of SP350
Continued on next page
NWA-033623-001 Rev.8.1
91ch2001.fm
JANUARY/31/2012