NEC UNIVERGE SV8300 Command Manual page 153

COMMAND CODE TITLE:
0B
Y
No. MEANING
0XX 0 : Maintenance Port
XX: Unit No. (01-50)
RESET
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
118 Community name for the
destination of trap
(Fourth place)
(4/4)
(76-100 characters)
NOTE: Only Unit No. 01 can be set by this data.
120 IP Address for the desti-
nation of trap
(First place)
121 IP Address for the desti-
nation of trap
(Second place)
122 IP Address for the desti-
nation of trap
(Third place)
123 IP Address for the desti-
nation of trap
(Fourth place)
NOTE:
The following conditions are applied to CM0B Y=0XX>120-123.
- Only Unit No. 01 can be set by this data.
- This data cannot be entered by CAT when using 8300R1 software.
- When setting the IP address by this data, a period (.) must be entered between
the numbers (example: 255.255.255.254).
2ND DATA
DATA
XX...X Character
(Maximum 25 characters)
NONE No data
NOTE
XXX.XX IP Address for the destina-
...X tion of trap
NOTE (Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NONE No data
NOTE
NOTE
NOTE
3-97
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
JUNE/15/2011
CM0B
91ch3001.fm