NEC UNIVERGE SV8300 Command Manual page 369

COMMAND CODE TITLE:
35
Y
No. MEANING
248 Forced release in designated
time for incoming trunk
route
249 Warning SST sending timer
for forced release to the
incoming trunk route of tan-
dem connection
NOTE: This command is effective when the forced release is provided to the outgoing trunk route of tandem
connection (CM35 Y=247 is set to 0).
250 Extended Interdigit Pause
Timer for outgoing call
254 Whether the call terminat-
ing method is specified for
incoming call with no CLI in
Day Mode
NOTE: Assign the call terminating method by CM35 Y=255 when this command is set to 0/1.
255 Specification of the call ter-
minating method for incom-
ing call with no CLI in Day
Mode
256 Whether the call terminat-
ing method is specified for
incoming call with no CLI in
Night Mode/Mode A/
Mode B
NOTE: Assign the call terminating method by CM35 Y=257 when this command is set to 0/1.
TRUNK ROUTE DATA
DATA
0 To provide
1 Not provided
0 Depends on Timer A (CM41 Y=0>114)
1 Depends on Timer B (CM41 Y=0>115)
2 Depends on Timer C (CM41 Y=0>116)
3 Forced release is not provided
0 To provide
1 Not provided
0 Specified when reason of the incoming call with
no CLI is "Privacy"
1 Specified for all incoming call with no CLI
3 Not specified
0 To transfer to the VRS/another station/
Attendant Console (assigned by CM51 Y=33)
1 To reject the call termination
2 To terminate the Multiline Terminal with
unusual lamp indication (assigned by CM35
Y=258)
3 To terminate as usual
0 Specified when reason of the incoming call with
no CLI is "Privacy"
1 Specified for all incoming call with no CLI
3 Not specified
SETTING DATA
MEANING
3-313
CM35
: Default
RELATED
COMMAND
CM35 Y=247
CM41 Y=0>114
CM41 Y=0>115
CM41 Y=0>116
CM41 Y=0>117
CM35 Y=255
CM35 Y=254, 258
CM51 Y=33
CM35 Y=257
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JULY/18/2008