NEC UNIVERGE SV8300 Command Manual page 664

COMMAND CODE TITLE:
B3
TRUNK
STATUS
DATA
2 Number of call waiting calls for prede-
termined time (CM41 Y=0>16) in queu-
ing mode on UCD Group
3 Number of abandoned calls to UCD
Group after predetermined time (CM41
Y=0>16) in queuing mode waiting calls
4 Number of incoming calls to all busy of
UCD Group
5 Number of incoming calls to UCD
Group that were answered
6 Number of times of queuing assigned by
CM42>16 was reached
9 Clear all UCD PEG COUNT data
NOTE 1: The counter data is effective from 00000 to 49999. The data is restarted from 00000 when the
data becomes more than 49999.
NOTE 2: Regardless of the setting of UCD Delay Announcement (set by CM41 Y=0>16), the number
of call waiting calls is counted after a certain period of time.
NOTE 3:
When answering by the virtual station, numbers of CMB3 Y=0 is counted towards the
answered station.
NOTE 4: Regardless of the setting of UCD Delay Announcement (set by CM41 Y=0>16), the number
of abandoned calls is counted after a certain period of time when the caller abandoned the
call.
All of incoming calls in queuing mode can be counted (set by CM08>1404), when using
8300R6 software or later.
NOTE 5: The number of incoming calls is counted in queuing mode while UCD Group is all busy.
UCD PEG COUNT
Y
MEANING
NOTE 2
NOTE 3, NOTE4
NOTE 5
SETTING DATA
DATA
XX XX: UCD Group (00-15)
[8300R5 or before]
: UCD Group (00-99)
[8300R6 or later]
999
3-608
CMB3
MEANING
See CM17 Y=2
NWA-033623-001 Rev.8.1
91ch3007.fm
JUNE/15/2011