NEC UNIVERGE SV8300 Command Manual page 74

COMMAND CODE TITLE:
04
Y
No. MEANING
01 Setting of System
Services (b)
SETTING OF SYSTEM SERVICES
1ST DATA
DATA MEANING
01 Connection port for MCI
[8300R1]
MCI
[8300R2 or later]
02 Purpose of Caller ID
sender
[North America/EU]
03 Handling of CPU call
information
NOTE: This command is not effective for the SMDR.
05 Destination to send a call
information
06 Destination to send a call
information which
received from Local
Office
07 SMDR Message Format
on RS-232C and Local
Office for Centralized
Billing-CCIS
08 SMDR Message Format
on IP
2ND DATA
DATA
0 RS1 on CPU
1 RS2 on CPU
7 No data
0 Available
7 Not available
0 Caller ID-Station
7 No data
2 Available
7 Not available
0 SMDR terminal via
LAN port
1 PMS
7 SMDR terminal via RS
port
0 SMDR terminal via
LAN port
1 RS port (To output to
RS1/RS2 port set by
CM40 Y=00)
3 Not output
00 Extended NEAX 2400
IMS Format
15 Former NEAX 2400
IMS Format
00 Extended NEAX 2400
IMS Format
15 Former NEAX 2400
IMS Format
3-18
: Default
RELATED
COMMAND
MEANING
CM08>507
CM10/
CM50
Y=00>8
CM04
Y=01>06
CM04
Y=01>03
CM40 Y=00
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM04