NEC UNIVERGE SV8300 Command Manual page 533

COMMAND CODE TITLE:
73
Example: If the number of Speed Dial numbers is 10 for Station Number 300, 20 for Station Number
301, and 30 for Station Number 302, the memory areas assignment is as follows.
Station
Number
300
301
302
303
The abbreviated codes for Station Speed Dialing are automatically determined by assigning this
command on a station basis.
If the number of Memory Parcels per station (or per station group) does not exceed 10, then Ab-
breviated Code=0-X.
If the number of Memory Parcels per station (or per station group) exceeds 10, then Abbreviated
Code=00-XX.
The following figure shows the relationship between Abbreviated Codes and Memory Parcels.
In the case of 10 Memory Parcels
10-Slot
Memory Block
MEMORY ALLOCATION FOR STATION SPEED DIALING
1000-Slot Memory
Block Number
00
00
00
00
Memory
Parcel (Abbreviated
Number Code)
0 0
1 1
2 2
3 3
4 4
5 5
9 9
Memory Start Block
Number (10-Slot
Memory Block)
00
01
03
06
In the case of 20 Memory Parcels
10-Slot
Memory Block
10-Slot
Memory Block
3-477
Number of 10-Slot
Memory Block
01
02
03
01
Memory
Parcel (Abbreviated
Number Code)
0 00
1 01
9 09
0 10
1 11
9 19
Continued on next page
NWA-033623-001 Rev.8.1
JULY/17/2009
CM73
91ch3005.fm