NEC UNIVERGE SV8300 Command Manual page 765

COMMAND CODE TITLE:
FA
NOTE 2: If ICMP TYPE not listed above is received, "HARDWARE ERROR" is displayed.
NOTE 3: TOS (Type of Service) is present in IP header, and represents QoS (Quality of Service).
Precedence/delay/throughput/reliability that determine quality are contained within TOS.
NOTE 4: This data cannot be set when the first digits of IP address is 0 (ex. 0.XXX.XXX.XXX).
NOTE 5:
The station number for Fixed Connection Mode registered by CM12 Y=92 is read by this
command.
NOTE 6: When the 2nd data is set to "CCC", the MAC Address of the appropriate D
by CM12 Y=92 is cleared.
NOTE 7: If you want to interrupt updating or to reset count data, do the following operation.
ST + FA50
When this operation is performed, the count data which can be read by CMFA Y=50>01/02
is cleared.
IP STATION APPARATUS INFORMATION
+ DE + 00 + DE + CCC + EXE
3-709
CMFA
term
IP registered
NWA-033623-001 Rev.8.1
91ch3008.fm
JULY/17/2009