NEC UNIVERGE SV8300 Command Manual page 768

COMMAND CODE TITLE:
FB
Y
No. MEANING
20 Failover Informa-
tion Read
[8300R6]
NOTE 1: This data can be set from PCPro connecting to Primary Unit, or Secondary Unit in Failover
mode.
NOTE 2:
The case when CMFB Y=20>XX99: 0 is displayed is as follows.
- The specified unit is disconnected.
- The specified unit is downloading the firmware of Access Blade/VoIPDB.
NOTE 3: When executing CMFB Y=20>XX99: 9999, the target unit is started to reset immediately.
Secondary Unit and Remote Unit can be reset from Primary Unit by this data. Remote Unit
can be reset from Secondary Unit in Failover mode by this data. No units can be reset from
Remote Unit by this data.
REMOTE PROGRAM DOWNLOAD INFORMATION READ,
FAILOVER INFORMATION READ
1ST DATA
DATA MEANING
XX00 Unit operation status
(Display only)
XX: Unit No. (01-50)
XX01 Connection status with
Primary Unit/Secondary
Unit (Display only)
XX: Unit No. (01-50)
XX99 Unit Reset
XX: Unit No. (02-50)
DATA
00 Primary Unit: Disconnect
01 Primary Unit: Operating normally
10 Secondary Unit: Disconnect
NOTE1
11 Secondary Unit: Normal mode
12 Secondary Unit: Failover mode
20 Remote Unit: Disconnect
21 Remote Unit: Normal mode
(Connecting to Primary Unit)
22 Remote Unit: Normal mode
(Connecting to Secondary Unit)
23 Remote Unit: Survival mode
NONE No Unit installed
00 Primary Unit: Disconnect
Secondary Unit: Disconnect
01 Primary Unit: Disconnect
Secondary Unit: Connect
NOTE1 10 Primary Unit: Connect
Secondary Unit: Disconnect
11 Primary Unit: Connect
Secondary Unit: Connect
0 Reset unavailable
Reset available
1
9999 Reset execution
3-712
2ND DATA
MEANING
NOTE 2
NOTE 3
NWA-033623-001 Rev.8.1
91ch3008.fm
JUNE/15/2011
CMFB