NEC UNIVERGE SV8300 Command Manual page 494

COMMAND CODE TITLE:
60
Y
No. MEANING
34 Displaying pattern of Caller ID on
the LCD of DESKCON before
answering or after answering a
trunk call
[8300R2]
35 Tenant number for DESKCON
[8300R2]
36 Ringing signal patterns of
DESKCON
[8300R2]
51 DESKCON number for PS-display
[8300R2]
90 DESKCON Soft Reset
[8300R2]
NOTE 1: Whether the following equipment can be accommodated to the same DLC blade or not are
depended on CM13 Y=63.
- When the second data of CM13 Y=63 is set to "0"
Accommodatable
Unaccommodatable: D
- When the second data of CM13 Y=63 is set to "1"
Accommodatable
Unaccommodatable: D
NOTE 2: A reset by CM60 Y=90>0: 0 is required after this data setting.
NOTE 3: Master ATT must be assigned to a single Attendant Console within the ATT Group.
ATT TENANT GROUP, FUNCTIONS
DATA
NONE
NOTE 1
XX...XX
NONE
NOTE 6, NOTE 7
term
: DT300/D
term
75/DESKCON
term
: DT300/D
term
70/PGD(2)-U10 ADP
GROUP NUMBER
MEANING
0 To display calling number on upper
line of LCD, calling name on
middle line of LCD
7 Not displayed calling number and
calling name simultaneously
00 Tenant No. 00
63 Tenant No. 63
No data
0 0.5ON-0.5OFF
1 1sON-1sOFF
2 2sON-4sOFF
3 1sON-2sOFF
X DESKCON No. for PS-display
(1 digit-8 digits)
No data
0 To reset
1 Already reset
term
85/D 70/PGD(2)-U10 ADP
term
85/D 75/DESKCON
3-438
CM60
: Default
RELATED
COMMAND
CM20 Y=0-3: 800
CM60 Y=90
CM60 Y=00, 01,
02, 04, 06, 16, 17,
23, 27, 30, 51
CM62
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/31/2012