NEC UNIVERGE SV8300 Command Manual page 537

COMMAND CODE TITLE:
74
Y
DATA
2 XX YY Z
4 XX YY Z
5 X-XXXXXXXX
NOTE 1: Memory area of System Speed Dialing with 1-8 digits abbreviated code is also used as the memory
area of Station Speed Dialing and MultiLine Terminal one-touch memory. Do not assign the same
Memory Slot number of System Speed Dialing with 1-8 digits abbreviated code (set by CM74 Y=0)
and as Memory Slot number of Station Speed Dialing (set by CM73)/MultiLine Terminal one-touch
memory (set by CM94).
NOTE 2: Set the same number of digits as the digits of abbreviated code assigned by CM42>77 to the first data.
NOTE 3: When setting the number of digits for abbreviated code to 5-8, the minimum number of the abbreviated
code that can be registered to the memory area is as follows.
• 5-digit abbreviated code: 500
• 6-digit abbreviated code: 333
• 7-digit abbreviated code: 250
• 8-digit abbreviated code: 200
STORED NUMBER FOR STATION SPEED DIALING
1ST DATA
MEANING
XX: 1000-Slot Memory Block
number (00-19)
YY: 10-Slot Memory Block
number (00-99)
Z : Memory Parcel number
(0-9)
XX: 1000-Slot Memory Block
number (00-19)
YY: 10-Slot Memory Block
number (00-99)
Z : Memory Parcel number
(0-9)
X: Abbreviated Code (0-9)
DATA
XXX...X
XXX...X
NONE
XXX...X
NONE
XX YY Z
CCC
NONE
3-481
2ND DATA
MEANING
Called Party Name Character by
PCPro/CAT (Maximum 16 charac-
ters)
Calling Party Name Character by
PCPro/CAT (Maximum 16 charac-
ters)
No data
Called Party Name Character Code
(Maximum 32 digits: 16 charac-
ters) (for Russian)
See Character Code Table for
Russian in CM77.
[8300R2]
No data
XX: 1000-Slot Memory Block
Number (00-19)
YY: 10-Slot Memory Block Num-
ber (00-99)
X : Memory Parcel Number (0-9)
Clear
No data
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM74
: Default
91ch3005.fm