NEC UNIVERGE SV8300 Command Manual page 127

COMMAND CODE TITLE:
08
BASIC SERVICE: 702-732
702 Ringing signal/Live Record Start signal which includes caller
information (such as station number and kind of calling party)
is sent to VMS
NOTE: Set the second data to "0" to enable Voice Mail Live
Record-CCIS.
703 Ringing signal/Live Record Start signal which includes calling/
forwarding party information (such as station number and kind
of calling party) of opposite office is sent to VMS, when a call
is terminated to VMS via CCIS
NOTE: 1st data=0 is effective only when CM08>379: 0.
704 The following signal is sent to VMS
• Busy signal
When the VMS forwards a call to a station/trunk and the
station/trunk is busy
• Answer signal
When the VMS forwards a call to a station/trunk and the
station/trunk answers
• Release signal
When a station/trunk hangs up while accessing the VMS
NOTE:
Set the second data to "0" to enable Voice Mail Live
Record-CCIS.
705 Remote Hold from DESKCON
[North America Only]
706 MW lamp control on a station of opposite office from VMS via
CCIS
NOTE: 1st data=0 is effective only when CM08>702: 0 and
CM08>703: 0.
708 Number of digits for station number in MCI message format
sent to VMS from CPU RS-232C port
709 MCI message format sent to VMS from CPU RS-232C port
BASIC SERVICES
BASIC SERVICE
0 To send
1 Not sent
0 To send
1 Not sent
0 To send
1 Not sent
0 Available
1 Not available
0 Available
1 Not available
0 6 digits
1 8 digits
0 Format with ANI
1 Format without ANI
3-71
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
NOVEMBER/12/2008
CM08