NEC UNIVERGE SV8300 Command Manual page 757

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

COMMAND CODE TITLE:

CMF7 Y=9 is the command which reassigns the high way channel (128ch) allocation to each physical

slot (slot1-6/7-12/13-18). For the physical slot, 16 channels are allocated to each slot in reset state

(the high way channel allocation is in a state which is not reassigned before).

When more than 17 channels are needed for adding blades, high way channel must be reassigned by

this command (when high way channel number is not reassigned, the channel numbers from the chan-

nel No.17 cannot be used).

After setting this command, Blade Reset is required for all the physical slots of the desired

highway channel by CME0 Y=3.

HIGHWAY CHANNEL MEMORY READ/REASSIGNMENT

NWA-033623-001 Rev.8.1