NEC UNIVERGE SV8300 Command Manual page 373

COMMAND CODE TITLE:
35
Y
No. MEANING
282 Calling party number relay-
ing in ISDN to ISDN/CCIS
to ISDN connection (for out-
going trunk route)
[For EU]
NOTE 1: This command must be set for outgoing trunk route.
NOTE 2:
Calling party number relaying in ISDN tandem connection is available when both CM35 Y=281 and
CM35 Y=282 are set to 0.
284 Mobility access Prefix
[8300R7] [For EU]
286 Registering a fault
information when a long call
duration of trunk call occurs
289 Setting of PAD data from a
trunk to a station
NOTE: This command is effective for the following trunks.
- LDT/ODT/PRT/DTI/CCT/SIP/IPT (P2P CCIS)
TRUNK ROUTE DATA
DATA
0 To provide
3 Not provided
2 Enblock Dialing Method (for Forced On PBX)
7 Not provided
0 Not registered
1 To register
01 -15 dB
-1 dB
15
16 0 dB
17 +1 dB
31 +15 dB
NONE 0 dB
+: Gain
- : Loss
SETTING DATA
MEANING
(1 dB increment)
(1 dB increment)
3-317
CM35
: Default
RELATED
COMMAND
CM35 Y=281
CM42>182
CMEA Y=2>04A
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/31/2012