NEC UNIVERGE SV8300 Command Manual page 634

COMMAND CODE TITLE:
A8
FUNCTION:
This command is used to assign a destination office for a message to be transferred (e.g. service infor-
mation) and the Common Channel Handler (CCH), IP trunk and SIP trunk which accommodate the mes-
sage.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + A8Y + DE
DATA TABLE:
1ST DATA
Y
No.
0 00001 Destination Point Code
(DPC) sent from distant
16367 office assigned by CMA7
NOTE 1 Y=02
1
NOTE 1: A maximum of 256 DPCs per system can be assigned.
NOTE 2: Programming procedure of CMA8 Y=0 is as follows.
- For IPT (P2P CCIS), set this data IPT No. 00.
- For Point-to-Point connection to SIP trunk (CMA7 Y=46: 1), set this data to SIP trunk No.
of SIP trunk that is used for DPC of SIP server assigned by CMA7 Y=02.
- For Point-to-Multipoint connection to SIP trunk (CMA7 Y=46: 0), set this data to SIP
trunk No. of SIP trunk that is used for DPC of SIP server assigned by CM8A Y=5XXX>
168.
CCIS CHANNEL/IP TRUNK/SIP TRUNK DATA 2
1ST DATA
DE
+ + +
(5 digits)
MEANING
2ND DATA
+ EXE
(2-12 digits)
2ND DATA
DATA
00 CCH/IP trunk/SIP trunk No. 00
15 CCH/IP trunk/SIP trunk No. 15
NONE No data
000000000001 IP Address
(Maximum 12 digits)
255255255254
NONE No data
3-578
RELATED
COMMAND
MEANING
CMA7 Y=02
NOTE 2
CMA7 Y=02
NOTE 3
Continued on next page
NWA-033623-001 Rev.8.1
CMA8
: Default
91ch3007.fm
APRIL/16/2010