NEC UNIVERGE SV8300 Command Manual page 172

COMMAND CODE TITLE:
0B
Y
No. MEANING
2XX 2 : VOIP Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
24 IP Address 6 (RTP) for
VoIPDB
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
25 IP Address 7 (RTP) for
VoIPDB
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
26 IP Address 8 (RTP) for
VoIPDB
NOTE 1, NOTE 2,
NOTE 3, NOTE 4,
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the IP address (RTP) by this data, a period (.) must be entered be-
tween the numbers (example: 255.255.255.254).
NOTE 3:
Up to 8 addresses (IP address 1 to 8) can be entered for IP address (RTP).
NOTE 4: One IP address (RTP) is required for every 16 used voice channels of VoIPDB.
NOTE 5:
When using PZ-64IPLC-A/PZ-128IPLC-A, CM0B Y=2XX>00 is effective for
IP Address (RTP) for VoIPDB and CM0B Y=2XX>20-26 is ineffective.
2ND DATA
DATA
XXX.XX IP Address
...X (Maximum 15 digits)
XXX.XXX.XXX.XXX=
RESET
0.0.0.1-255.255.255.254
NONE No data
NOTE 5
RESET
NOTE 5
RESET
NOTE 5
3-116
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM0B
91ch3001.fm