NEC UNIVERGE SV8300 Command Manual page 671

COMMAND CODE TITLE:
BA
Y
No. MEANING
30 SIP server IP Address
NOTE 1:
This data setting is not required when the IP address for SIP server is determined by DNS resolu-
tion.
NOTE 2: For Point-to-Multipoint connection (when CMA7 Y=46 is set to "0"), the IP address assigned by
this data depends on the IP address pattern assigned by CM8A Y=5000-5255>167.
31 SIP server Port number
NOTE 1:
The port number of SIP server is 5060 in general.
NOTE 2: Set the same port numbers to the all ports in a network for Point-to-Multipoint connection (when
CMA7 Y=46 is set to "0").
32 Registration number
(representative num-
ber) assignment
NOTE 1:
CMBA Y=32 must be set when the calling number is noticed by using SIP (used as a registry for
SIP server).
NOTE 2: When the second data of CMBA Y=44 is set to "0" or "1", the Registration number (Representa-
tive number) assigned by this command is used as the calling number.
SIP PROFILE DATA
1ST DATA
DATA MEANING
00 Profile number
for control
RESET
31 packet
00 Profile number
for control
RESET
31 packet
00 Profile number
for control
31 packet
RESET
2ND DATA
DATA
aaabbb SIP server IP Address
cccddd aaa : 000-255
bbb: 000-255
ccc : 000-255
ddd: 001-254
NONE No data
00000 SIP server Port number
65534
NONE No data
X Registration number
(representative number)
X...X (Maximum 24 digits)
X: 0-9, A (*), B (#)
NONE No data
3-615
RELATED
COMMAND
MEANING
CMA7 Y=71
CM0B Y=136
CMA7 Y=71
CMA7 Y=71
CMBA Y=44
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CMBA
: Default
91ch3007.fm