NEC UNIVERGE SV8300 Command Manual page 520

COMMAND CODE TITLE:
67
Y
No. MEANING
21 Programmable list
4
22 Programmable list
5
23 Programmable list
6
24 Programmable list
7
LOCATION DATA ASSIGNMENT
1ST DATA
DATA MEANING
00 FAX Protocol Pat-
tern No.
NOTE 1: To avoid the false detection, set the second data to 00 when the locations
(between locations) do not provide FAX over IP feature.
NOTE 2:
When using SIP trunk, set FAX Protocol Pattern by CMBA Y=119.
01 FAX Payload Size
Pattern No.
NOTE: When using SIP trunk, set FAX Payload size by CMBA Y=120.
08 Minimum value of
jitter buffer
NOTE 1:
When setting CM67 YY=21/22/23/24>08 to other than default, set CM67
YY=21/22/23/24>09 to other than default.
NOTE 2: Assign the value which does not exceed the maximum value of jitter buffer set
by CM67 Y=21/22/23/24>09.
NOTE 3: This data is not available when using T.38 UDPTL.
NOTE 4:
Jitter buffer of PZ-64IPLC-A/PZ-128IPLC-A (VoIPDB) is controlled as 200
ms., when minimum value of jitter buffer is set more than 210 ms.
2ND DATA
DATA MEANING
00 Not detected the FAX
protocol
01 G.711 µ-law
02 G.711 A-law
03 G.726
06 T.38 UDPTL
[8300R3]
NONE As per Fixed list of
CM67 Y=20
01 10 ms.
04 40 ms.
(10 ms. increments)
NONE As per Fixed list of
CM67 Y=20
01 10 ms.
30 300 ms.
(10 ms. increments)
NONE 120 ms.
3-464
CM67
: Default
RELATED
COMMAND
CM67 Y=20
NOTE
CM67 Y=20
CM67 Y=21/22/
23/24>09
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/31/2012