NEC SL1000 Features And Specifications Manual page 316

SL1000/SL1100
To set a room as checked out:
Set a room as checked out after your guest checks out and the room is clean. You can set a room as
checked out only if you have previously dialed 738 to check it in.
1. Lift the handset.
2. Dial 739.
3. Dial the extension number of the room you want to check out.
You hear confirmation tone.
4. Hang up.
In the STATUS mode, the DSS Console key for the room is off.
H
House Cleaning Options
To set a room house cleaning status from the room telephone:
Your cleaning staff can set the room status.
1. Lift the handset.
2. Dial 740.
3. Dial the room status code:
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
* = Reserve 5
# = Reserve 6
You hear confirmation tone.
4. Hang up.
In the STATUS mode, the DSS Console shows the room status: Slow Flash for Inspect Room; Fast
Flash for Maid Required. (SL1000)
In the STATUS mode, the DSS Console shows the room status: Slow Flash for Maid Required; Fast
Flash for Inspect Room. (SL1100)
To set room status from another telephone:
The supervisor's station should be the only telephone with this ability.
1. Lift the handset.
2. Dial 741.
3. Dial the extension number of the room you want to set.
1-306
ISSUE 2.0
Hotel/Motel - Room Status