NEC SL1000 Features And Specifications Manual page 793

ISSUE 2.0
To program a key, press Speaker key, dial 851 (for 3-digit code) or 852 (for 2-digit codes), press the key
For this Use this key...
feature...
Call For- Code: 14
warding, Operation: Press key +
Both Ring Dest. Extension
Call For- Code: 11
warding, Operation: Press key +
Busy Dest. Extension
Call For- Code: 13
warding, Operation: Press key +
Busy/No Dest. Extension
Answer
Call For- Code: 54
warding, Operation: Press key +
External by Dest. Number
Door Box
Call For- Code: 15
warding, Operation: Press key +
Follow Me Dest. Extension
Call For- Code: 10
warding, Operation: Press key +
Immediate Dest. Extension
Call For- Code: 12
warding, No Operation: Press key +
Answer Dest. Extension
Call For- Code: 37
warding / Operation: Call extension
Do Not Dis- + Press key
turb Over-
ride
Callback / Code: 35
Camp-On/ Operation: Call busy ex-
Trunk tension or access busy
Queuing trunk + Press key
Call Redi- Code: 49 + extension or
rect voice mail
Operation: Press key
Central Of- Code: * 01 + Trunk num-
fice Calls ber (001~126 (SL1000)
001~088 (SL1100))
Operation: Press key
Conference Code: 07
Operation: Set up call +
Press key + set up call to
add + Press key twice
Department Code: 46
Calling Operation: Press Key
Department Code: 36
Step Calling Operation: Dial busy ext +
Press key
Features and Specifications Manual
and enter the code (e.g., 48 for Voice Over).
When you ...
Call Forward Both
Ring to extension.
Call Forward Busy to
extension or Voice
Mail.
Call Forward Busy/No
Answer to extension
or Voice Mail.
Externally Call For-
ward Door Box calls.
Call Forward Follow
Me to extension or
Voice Mail.
Call Forward Immedi-
ate to extension or
Voice Mail.
Call Forward No An-
swer to extension or
Voice Mail.
Override an extension
Call Forwarding or Do
Not Disturb.
Leave a Call back re-
quest at a busy exten-
sion, Camp On to a
busy extension, or
Queue for a busy
trunk.
Redirect a ringing call
to the predefined des-
tination.
Press a line key to
place or answer a
trunk call (where
trunks are 001~126
(SL1000) 001~088
(SL1100)).
Set up a Conference
or a Meet Me Confer-
ence.
Log in or log out of
your Department Call-
ing Group.
Step Call through a
Department Group for
an idle member.
Key Lamp Status Also See Srvc
Slowly flashes red
Slowly flashes red
Slowly flashes red
Slowly flashes red
Slowly flashes red
Slowly flashes red
Slowly flashes red
None
On red when activa-
ted
On red when activa-
ted
On green when
seized, on red when
in use (by other par-
ty), Slow Flash green
when ringing, Hold
key flash when on
Hold
On red during setup
On when removed,
Off when installed
None
SL1000/SL1100
Note
Code
842
#1
844
822
846
848
845
-
#
-
#0
826
750
4
2-15