NEC SL1000 Features And Specifications Manual page 164

SL1000/SL1100
Guide to Feature Programming
Program Num-
ber
11-10-17
11-11-33
20-06-01
20-08-08
21-07-01
C
21-09-01
21-09-02
21-10-01
90-19-01
Operation
To set Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 700 (default).
3. Dial the 4-digit Dial Block Code (as set in programming).
4. Dial 1.
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
To release Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 700.
3. Dial the 4-digit Dial Block code.
4. Dial 0.
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
To set Dial Block from another extension:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
1-154
Program Name
Service Code Setup (for System Administration) - Dial
Block by Supervisor
Service Code Setup (for Setup/Entry Operation) - Dial
Block
Class of Service for Extensions
Class of Service Options (Outgoing Call Service) - Toll Re-
striction Dial Block
Toll Restriction Override Password Setup - Password
Dial Block Setup - Toll Restriction Class with Dial Block
Dial Block Setup - Supervisor Password
Dial Block restriction Class per Extension
Dial Block Release
Code Restriction, Dial Block/Toll Restriction, Dial Block
ISSUE 2.0
Default
701
700
All extension port = Class 1
COS 01~15 = 0
not assigned
1
not assigned
0
[Release?]: Dial 1+ press Hold key
(Press Hold key to cancel.)