NEC Aspila Topaz Programming Manual page 123

IN
SA
SB
COPY
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1-4) for the Virtual
Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension simultaneously, the
tone with the highest order number (e.g., 1) rings. The other keys just flash.
Input Data
Extension Number
Order
0 : Tone Pattern 1
1 : Tone Pattern 2
1-4 2 : Tone Pattern 3
3 : Tone Pattern 4
4 : Incoming Extension ring tone
Default
By default, Virtual Extension Ring tones have the following order.
Conditions
None
Feature Cross Reference
Multiple Directory Number / Call Coverage
Telephone Programming Instructions
To enter data for Program 15-10(Incoming Virtual Extension Ring Tone Order Setup):
1. Enter the programming mode.
2. Enter 15 10
15-10-01 TEL200
Order1 RG Pttrn0
3. Enter the number of the item you want to program.
15-10-xx TELxxxx
xxxxx
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 15: Extension Basic Setup
15-10:
Incoming Virtual Extension Ring Tone Order Setup
Data
Order
1
2
3
4
Max. 4 digits
Description
In the case of that two or more virtual
extensions are set on a function key on the
keyset, and the tone pattern by which the
sound of each extension differs, the priority of
ring sound is set up.
Ring Tone
(Set in Program 15-08)
0 (Tone Pattern 1)
1 (Tone Pattern 2)
2 (Tone Pattern 3)
3 (Tone Pattern 4)
115
Related
Program
15-08
Programming Manual