NEC Aspila Topaz Programming Manual page 245

IN
SA
SB
Description
Use Program 25-09 : Class of Service for DISA Users to set the DISA Class of Service for each user. When a
DISA caller enters a password (defined in Program 25-08), the system identifies the user and associates the
appropriate DISA Class of Service with the call. Assign the DISA Class of Service options in Program 20-14. When
programming DISA Class of Service, you make one entry for each Night Service mode.
Input Data
DISA User Number
Day/Night Mode
1-8
Conditions
1) The DISA Class of Service cannot be 0.
2) You cannot use Program 20-06 to assign Class of Service to DISA trunks.
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-09(Class of service for DISA Users):
1. Enter the programming mode.
2. Enter 25 09
25-09-01DISA-U1
Mode1 Class 1
3. Enter the number of the item you want to program.
25-09-xxDISA-
Uxx
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 25: DID/DISA Setup
25-09: Class of Service for DISA Users
237
1-15
Class of Service
1-15
Programming Manual
Default
1