NEC Aspila Topaz Programming Manual page 316

Program 44: ARS/F-Route Setup
44-04:
ARS/F-Route Selection for Time Schedule
Description
Use Program 44-04 : ARS/F-Route Selection for Time Schedule to assign each ARS/F-Route Selection number
to an ARS/F-Route table number for each ARS/F-Route time mode. There are 8 time modes for ARS/F-Route
Access.
Input Data
ARS/F-Route Selection Number
ARS/F-Route Time Mode
1-8
Conditions
None
Feature Cross Reference
Automatic Route Selection(ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-04 (ARS/F-Route Selection for Time Schedule):
1. Enter the programming mode.
2. Enter 44 04
44-04-01SelNo1
F-RouteMode1=0
3. Enter the number of the item you want to program.
44-04-xxSelNoxxx
xxxxx
4. Select the ARS/F-Route Selection number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
ARS/F-Route Table Number
0-500
308
IN
SA
SB
1-500
Related
Default
Program
0