NEC Aspila Topaz Programming Manual page 93

IN
SA
SB
COPY
Input Data(Cont'd)
Prog. No.
14-01-18 Warning Beep Tone Signaling
14-01-19
Privacy Mode Toggle Option
Use this option to enable or disable
a trunk's ability to be switched
from private to non-private mode
by pressing the line key or Privacy
Release function key.
14-01-20 Block Outgoing Caller-ID
Allow (0) or Block (1) the system
from automatically blocking
outgoing Caller ID information
when a user places a call. If
allowed (i.e. block, enabled), the
system automatically inserts the
Caller ID block code (defined in
14-01-21) before the user dialed
digits.
14-01-21 Caller-ID Block Code
Enter the code, up to 8 digits, that
should be used as the Caller ID
Block Code. This code is
automatically inserted before
dialed digits if Program 14-01-20 is
set to '1'.
14-01-22 Caller-ID to Voice Mail
Enable or disable the system's
ability to send the Caller ID digits
(Remote Log-On Protocol) to voice
mail.
14-01-23
Least Cost Routing
Default
14-01-01: Trunk Name
Trunk Port Number
Conditions
None
Feature Cross Reference
Refer to feature in above chart.
Program 14: Trunk Basic Setup
14-01: Basic Trunk Data Setup
Item
0 : Disable
1 : Enable
0 : Disable
1 : Enable
0 : Allow
1 : Block
0 : Dial (Up to 8 digits)
1 : Enable
0 : Disable
1 : Enable
0 : LCR Off
1 : LCR On
2 : LCR On (Cost Center
Code only)
1
2
:
51
Input data
Line 01
Line 51
85
Default Related Program
0
0
0
No
setting
0
0 26-01-04
26-05 to 26-08
Name
Line02
:
Programming Manual