NEC Aspila Topaz Programming Manual page 40

Program 10: System Configuration Setup
10-20: LAN Setup for External Equipment
Description
Use Program 10-20 : LAN Setup for External Equipment to define the TCP port/address/etc. for communicating
to external equipment.
Input Data
Type of External Equipment
Prog. No.
TCP Port
10-20-01
10-20-02 -Not Used-
10-20-03 Keep alive time
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 10-20 (LAN Setup for External Equipment):
1. Enter the programming mode.
2. Enter 10 20
10-20-01 Ex-Dev1
TCP Port
3. Enter the number of the item you want to program.
10-20-xx Ex-Devx
xxxxx
4. Select the External Device number to be programmed by pressing the FLASH or the VOLUME ▲ or
VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section
Programming Manual
Item
0-65535
-
1-255(sec)
32
1 : CTI Server
5 : SMDR Output
Input data
IN
SA
SB
Default
0
-
30