NEC Aspila Topaz Programming Manual page 240

Program 25: DID/DISA Setup
25-06:
DID/DISA One Digit Code Attendant Setup
Description
Use Program 25-06 : DID/DISA One-Digit Code Attendant Setup to set up single digit dialing through the VRS.
This gives VRS callers single key access to extensions, the company operator, Department Calling Groups and
Voice Mail. For each VRS message set to answer outside calls (see Program 25-04 and 25-05), you specify:
• The digit the VRS caller dials (0-9, *, #). (Keep in mind that if you assign destinations to digits, outside callers will
not be able to dial system extensions.
• The destination reached (eight digits max.) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice Mail master number. A one-
digit code can be assigned for each Automated Attendant message.
Example:
Attendant Message Number=01, Received Dial=2, Next Attendant Message Number=0, Destination Number=399,
In this example, when "2" is dialed by an outside caller, the system transfers the call to "399". This means that ext
200-299 cannot receive calls from DID / DISA users during/after VRS Message 01.
Input Data
Attendant Message Number
Received Dial
Prog. No.
25-06-01
Next Attendant Message Number
25-06-02
Destination Number
Conditions
None
Feature Cross Reference
Direct Inward System Access (DISA)
Voice Response System (VRS)
Programming Manual
Item
0-48 ( 0 : no setting)
Max. 4 digits
232
01-48
0-9,*,#
Input Data
No setting
IN
SA
SB
Related
Default
Program
1