NEC Aspila Topaz Programming Manual page 92

Program 14: Trunk Basic Setup
14-01: Basic Trunk Data
Input Data(Cont'd)
Prog. No.
14-01-08 Toll Restriction
Use this option to enable/disabled
Toll Restriction for the trunk. If
enabled, the trunk follows Toll
Restriction programming
(ex: Programs 21-05, 21-06). If
disabled, the trunk is a toll free
line.
14-01-09 -Not used-
14-01-10 DTMF tone for Outgoing Calls
Use this option to enable (1) or
disable (0) DTMF back tones for
outgoing trunk calls.
14-01-11 Account Code required
14-01-12 -Not Used-
14-01-13 Loop Disconnect Supervision
Use this option to enable (1) or
disable (0) loop supervision for the
trunk. This option is required for
Call Forwarding Off-Premise and
Tandem Trunking only.
14-01-14 Long Conversation Cutoff
Use this option to enable or disable
the Long Conversation Cutoff
feature for each trunk.
14-01-15
Long Conversation Alarm before
Cutoff
Use this option to enable or disable
the Long Conversation Alarm for
each trunk.
14-01-16 Forced Release of Held Call
Use this option to enable/disable
forced release for calls on Hold. If
enabled, the system disconnects a
call if it is on Hold longer than a
programmed interval (Program
24-01-05). If disabled, forced
disconnection does not occur.
Program 24-01-01 also affects this
option.
14-01-17 Trunk to Trunk Warning Tone
for Long Conversation Alarm
Use this option to enable or disable
the Warning Tone for Long
Conversation feature for DISA
callers.
Programming Manual
Item
0 : Restriction Disable
1 : Restriction Enable
-
0 : Disable
1 : Enable
0 : Disable
1 : Enable
-
0 : Disable
1 : Enable
0 : Disable
1 : Enable
0 : Disable
1 : Enable
0 : Disable
1 : Enable
0 : Disable
1 : Enable
Input data
84
IN
SA
SB
COPY
Default Related Program
1 21-04
21-05
21-06
-
1
1
-
0
0 20-21-03
20-21-04
0
0
0