NEC Aspila Topaz Programming Manual page 145

IN
SA
20-08: Class of Service Options (Outgoing Call Service)
SB
Input Data(Cont'd)
Prog. No.
20-08-15 Block Outgoing Caller ID
Enable (1) or disable (0) the system's ability to
automatically block outgoing Caller ID information when
a user places a call. If this option is on, the system
automatically inserts the Caller ID block code (defined in
Program 14-01-21) before the user's dialed digits.
20-08-16 -Not Used-
20-08-17 ARS Override Access Map
*All Classes are above mentioned default value.
Conditions
None
Feature Cross Reference
Class of Service
Telephone Programming Instructions
To enter data for Program 20-08(Class of Service Options(Outgoing Call Service)):
1. Enter the programming mode.
2. Enter 20 08
20-08-01 F-Cls1
Intercom Call 1
3. Enter the number of the item you want to program.
20-08-xx F-Clsxx
xxxxx
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME
or VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 20: System Option Setup
Item
137
Input Data Default*
0 : Off
1 : On 0
- -
0 : Disable
(Not Override)
0
1 : Enable
（Override)
Programming Manual
Related
Program
14-01-20
14-01-21
-