NEC Aspila Topaz Programming Manual page 247

IN
SA
SB
Description
For systems that use Toll Restriction, use Program 25-11 : DISA Toll Restriction Class to assign a Toll
Restriction Class (1-15) to each DISA user (1-15). The system uses the Toll Restriction Class you enter in Program
21-05 and 21-06. The Toll Restriction Class assigned to a DISA call is based on the DISA Class of Service and user,
which is determined by the password the caller dials.
When programming, you make a separate entry for each Night Service mode.
Input Data
DISA User Number
Day/Night Mode
1-8
Conditions
You cannot use Program 21-05 to assign Toll Restriction to DISA trunks.
Feature Cross Reference
Direct Inward System Access (DISA)
Toll Restriction
Telephone Programming Instructions
To enter data for Program 25-11(DISA Toll Restriction Class):
1. Enter the programming mode.
2. Enter 25 11
25-11-01DISA-U1
Mode1 T/RClass2
3. Enter the number of the item you want to program.
25-11-xxDISA-
Uxx
4. Select Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 25: DID/DISA Setup
25-11: DISA Toll Restriction Class
Toll Restriction Class
1-15
239
1-15
Default
2
Programming Manual