NEC Aspila Topaz Programming Manual page 205

IN
SA
SB
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling Group for each
DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or Ring Group programming.
If an extension has a line key, the DIL rings the line key. If the extension does not have a line key, the DIL rings
loop keys (if programmed) or the CALL key (CALL key will always ring). Use Program 22-02 to designate a trunk
as a DIL). You can make eight DIL assignments, one for each Night Service mode:
Input Data
Trunk Port Number
Day/Night
Number of Transferring Destination
Mode
• Extension number (Max. 4 digits)
1-8 • Department Group number
Conditions
Program 22-02 must be set to '4' for the trunk.
Feature Cross Reference
Direct Inward Line (DIL)
Telephone Programming Instructions
To enter data for Program 22-07(DIL Assignment):
1. Enter the programming mode.
2. Enter 22 07
22-07-01 Trunk1
Mode1 No =
3. Enter the number of the item you want to program.
22-07-xx Trunkxx
xxxxx
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 22: Incoming Call Setup
(Max.4 digits)
22-07: DIL
Default
No setting
197
Assignment
1-51
Related Program
22-02
or
Programming Manual