Led Descriptions; Cl1Trx/Bl1Trx Assy; P3Rly/P2Rly Assy; Sysconpm/Sysconcm Assy - GE LOGIQ P5 Service Manual

GE H
EALTHCARE
D 5394141, R
IRECTION EVISION
Section 7-6

LED Descriptions

7-6-1

CL1TRX/BL1TRX Assy

The CL1TRX/BL1TRX Assy is located at the No.1 slot in the NEST Assy.
Table 7-8
LED
DS1
7-6-2

P3RLY/P2RLY Assy

The P3RLY Assy is located at the front of the NEST Assy.
Table 7-9
LED
D1
D2
D3
D4
7-6-3

SYSCONPM/SYSCONCM Assy

The SYSCONPM/SYSCONCM Assy is located at the No.3 slot of the NEST Assy.
Table 7-10
LED
DS1
DS2
DS3
DS4
5
LEDs on CL1TRX/BL1TRX Assy
Descriptions
FPGA configuration OK status Indicator
LEDs on P3RLY/P2RLY Assy
Descriptions
MUX embedded Probe Recognition Indicator
Selected probe connector position number bit 0
Selected probe connector position number bit 1
FPGA Configuration OK status indicator
LEDs on L1SYSCON Assy
Descriptions
CPDI FPGA configuration OK indicator
Frame Start signal. Scan running status indicator
FEBC FPGA configuration OK indicator
DSP operation OK indicator
Section 7-6 - LED Descriptions
LOGIQ™ P5 S
EVICE
Normal State
Normally Blinking
Normal State
Normally On
Depend on live probe position
Depend on live probe position
Normally On
Normal State
Normally On
Normally blinking on scanning
Normally On
Normally blinking
M
ANUAL
7-21