Insite Ip Address Configuration; Loading Base System Software - GE LOGIQ P5 Service Manual

GE H
EALTHCARE
D 5394141, R
IRECTION EVISION
Section 3-10

Insite IP Address Configuration

This information needed to facilitate the OnLine Center engineers in connecting to the system is found
in the InSite Installation Manual.
Section 3-11

Loading Base System Software

3-11-1 Loading Base system Software
For more information on loading base system software, refer to Chapter 8.
Section 3-12
Warnings
3-12-1 Warnings
3-12-1-1 USB HDD
External USB type Hard drive may be used to back up the data. But not all kinds of USB type can
be supported.
Never use USB types which require additional power source.
3-12-1-2 Starting Echoloader in Maintenance mode
If Echoloader never started once, starting Echoloader in the maintenance mode will not work. In
other words, in order to be able to start Echoloader in maintenace mode, Echoloader should have
been started at least once.
5
Section 3-10 - Insite IP Address Configuration
LOGIQ™ P5 S M
EVICE ANUAL
3-25