Wireless installation for Windows
17
Disconnect the network cable between your access
point (hub or router) and the machine, and click
Next.
18
The machine will restart automatically. After the
machine is restarted, check Checked and
confirmed., and then click Next. Wait until the
restart is completed.
You have completed the wireless setup. A four level indicator of your machine's LCD
represents the wireless signal strength. If you chose to install the drivers in Step 6,
go to step 19.
19
The driver installation starts. After reading and
accepting the ScanSoft
Agreement, click Yes.
(Not available if you chose Driver Install Only in
Step 6.)
20
The installation of PaperPort
Suite.
®
®
®
PaperPort
9.0SE License
®
9.0SE will automatically start and is followed by the installation of MFL-Pro
8
8 - 21