Control panel setup
3
(For Wired) Press
▲
(For Wireless) Press
Press OK.
4
to select APIPA.
Press
▲
or
▼
Press OK.
5
Press
▲
or
▼
to select On or Off.
Press OK.
6
Press Stop/Exit.
3.Setup WLAN (for wireless network only)
1.Setup Wizard
The Setup Wizard guides you through the wireless network configuration. For more information, see Using
the Setup Wizard from the control panel LAN menu for a wireless network on page 3-3.
2.SecureEasySetup
TM
The SecureEasySetup
manually. By pushing a button on the wireless router or access point, you can complete setup and secure the
wireless network. Your router or access point must also support SecureEasySetup
TM
SecureEasySetup
software to configure your machine in a wireless network on page 3-11.
4.WLAN Status (for wireless network only)
1.Status
This field displays the current wireless network status; Active (802.11b), Active (802.11g),
Searching SSID or Disabled.
(For DCP-340CW)
1
Press Menu.
2
Press
▲
or
▼
to select 3.LAN.
Press Set.
to select TCP/IP(Wired).
or
▼
to select TCP/IP(WLAN)
▲
or
▼
software allows you to configure the wireless network easier than configuring it
. See Using the
TM
4 - 17
4