Wireless installation for Windows
18
If you chose to use a network cable in Step 8, go to step 19.
If you chose not to use a network cable in Step 8, go to step 21.
19
Disconnect the network cable between your access
point (hub or router) and the machine, and click
Next.
20
The machine will restart automatically. After the
machine is restarted, check Checked and
confirmed., and then click Next. Wait until the
restart is completed. Go to step 22.
21
Using the information you recorded in Step 11,
return the wireless settings of your computer back to
their original settings. Click Next.
You have completed the wireless setup. A four level indicator of your machine's LCD
represents the wireless signal strength. If you chose to install the drivers in Step 6,
go to step 22.
®
8
8 - 10